ROLOAD
Synchronous loading and unloading of rails of up to 40 m length in a very short time. The operator controls all cranes from a safe position.
Please check the product sheet () for further information and accessories.
Lifting power | 900 - 1500 kg | |||
Rail length up to | 40 m | |||
Max. superelevation | 180 mm | |||
Crane range | approx. 2,6 m | |||
Automation options | Automatic remote control operation of the crane |
How many ROLOADs do I need?
Due to stipulated bending and stress limits it is recommended to install a ROLOAD unit every 10 m of rail length. The cranes are operated synchronously via radio remote control. If required, cranes can be controlled individually.
How is the ROLOAD installed?
Installation is quick and easy and can be done on all standard flat wagons without affecting the wagon approval.
Fixing variants:
This allows individual adjustment to any wagon of any width (2.60 - 3.10 m).
Where can ROLOAD be installed?
Variable use depending on client requirement:
A flexibly moving counterweight is used to balance the permitted distribution of the overall load. The cranes can be repositioned in one work process without any aids and laborious set-up procedures.
Can ROLOAD also be used in tunnels?
Das System kann auf verschiedene Arbeitsmodi eingestellt werden. Im Tunnelmodus fährt der Teleskopausleger automatisch nur bis zur vordefinierten Länge aus.
Why should stress and bending limits be adhered to?
The synchronised loading and unloading process prevents the rail from turning, tilting and strong deformation. Costs due to damaged rail and further maintenance work do not apply.
Rail Loader